Ultimate Inspection Guide: 7 Make-or-Break Checks for Imported Furniture

Created on 10.16
0
📦 Check 1: Packaging "Red Flags"
The moment you unwrap - spot these issues and snap photos immediately!
⚠️ Water damage, severe dents, puncture holes
✅ Pro Move: Mark "packaging damaged" on receipt - your key evidence for claims!
💔 Check 2: Hidden "Internal Injuries"
These 3 spots are most vulnerable:
• Corner structures - run hands along all edges
• Connection points - gentle shake test
• Surface coating - observe at 45-degree angle
🔧 Check 3: Assembly "Dealbreakers"
30% of complaints come from:
→ Misaligned screw holes
→ Loose pre-embedded nuts
→ Substandard board thickness
💡 Expert Tip: Assemble one component using supplier-provided tools!
0
🎯 Check 4: Color "Mismatch Nightmares"
Different batches = different colors? 3-second detection:
1.Compare with sample in natural light
2.Multi-angle surface inspection
3.Check color variation at joints
🌟 Remember: Acceptable color difference ≤5%
📏 Check 5: Measurement "Stealth Traps"
Break out the tape measure for:
▷ Overall dimensions (±3mm tolerance)
▷ Diagonal deviation (≤2mm acceptable)
▷ Functional dimensions (e.g., drawer depth)
👃 Check 6: Odor "Health Alerts"
Upon opening:
✅ Slight wood scent: Normal
❌ Pungent chemical smell: Ventilate immediately + test formaldehyde!
Emergency Protocol: If smell persists after 24h ventilation, contact supplier NOW!
Contact
Leave your information and we will contact you.

Customer services

Sell on waimao.163.com

Youtube
Facebook